MONITOR REPAIR TIPS PAGE 1
MAKE MODEL CHASSIS SYMPTOM CURE
ACER 7133S N/A Shut Down resolder plugs on CRT PCB
AMDEK AM732E N/A BRIGHT SCREEN WITH RETRACE LINES CHECK/REPLACE IC202 (P/N# LM2416) AND R251 (47?@ 1 watt)
AMDEK AM732E N/A HIGH PITCHED SQUEAL FROM POWER SUPPLY AREA CHECK/RESOLDER CONNECTIONS ON R802,R803 AND R804
COMPAQ 420 N/A NO VERTICAL SWEEP CHECK/REPLACE IC202 AND R320
CTX CVP5468 N/A NO HORZ. SWEEP JUST A VERTICAL WHITE LINE CHECK/REPLACE C322
CTX CVP5468 N/A INTERMITTENT LOSS OF ONE OF THE PRIMARY COLORS OR BRIGHT SCREEN WITH RETRACE LINES CHECK/RESOLDER CONNECTIONS ON CRT SOCKET
DTK LM2714 N/A DEAD SET - POWER SUPPLY SQUEALS CHECK/REPLACE D005,D006,D007 AND D009
EMERSON 1415EM N/A POWER SUPPLY SQUEALS - NO POWER CHECK/RESOLDER CONNECTIONS ON FLYBACK AND HORZ. OUTPUT
EMERSON 1415EM N/A HAS HIGH VOLTAGE BUT NO FILAMENT VOLTAGE CHECK/REPLACE L4202 FOR OPEN
EMERSON 1415EM N/A DEAD - WILL NOT POWER UP CHECK/REPLACE IC501 AND R507
EMERSON 1440EM N/A DEAD - WILL NOT POWER UP CHECK/REPLACE IC501 AND R507
EMERSON 1445EM N/A DEAD - WILL NOT POWER UP CHECK/REPLACE IC501 AND R507
EMERSON 4000EM N/A DEAD WITH A HIGH PITCHED SQUEAL CHECK/REPLACE Q104 AND T101
EMERSON 4000EM N/A SQUEAL FROM HORZ. CIRCUIT-HORZ. CENTERING OFF TO THE LEFT- HORZ. FOLDOVER ON THE LEFT CHECK/REPLACE Q104 AND C104 FOR OPEN
GATEWAY 2000 CS1572FS N/A SEVERE PIECRUSTING AFTER REPLACEMENT OF HORZ. OUTPUT XSTR. CHECK/REPLACE L106 (6mH CHOKE) - CHOKE CAN BE REWOUND WITH 230 TURNS OF #26 AWG ENAMELED WIRE
GATEWAY 2000 CS1572FS N/A DEAD SET CHECK/REPLACE IC301 (P/N# UC3842)
GATEWAY 2000 CS1572FS N/A DEAD SET CHECK/REPLACE ON Q105
GATEWAY 2000 CS1572FS N/A DISPLAY SHAKES, POWER SUPPLY SQUEALS OR HISSES CHECK/REPLACE R331 (91k @ 1watt)
GATEWAY 2000 CS1572FS N/A CLICKS ON/OFF - NO PICTURE CHECK/REPLACE Q106 (2SD1880), D107 (BY329) AND R153 (1?1w)
GOLDSTAR 1210 N/A NO VIDEO-BRIGHT SCREEN WITH RETRACE LINES CHECK/REPLACE Q304 FOR SHORT
GOLDSTAR 1420EGA N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR 1430VGA N/A NO VERT. SWEEP CHECK IC601,R617 AND R726
GOLDSTAR 1430VGA N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCH4095 CT5 NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR MCH4095 CT5 COMES ON WITH BRIGHT GREY BACKGROUND AND SHORT VERT. SWEEP BUT WORKS FINE AFTER 3-5 MINUTES CHECK/REPLACE C931 OR C932 FOR OPEN
GOLDSTAR MCH4175 CT5 COMES ON WITH BRIGHT GREY BACKGROUND AND SHORT VERT. SWEEP BUT WORKS FINE AFTER 3-5 MINUTES CHECK/REPLACE C931 OR C932 FOR OPEN
GOLDSTAR MCH4175 CT5 NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR MCH4235 CT5 COMES ON WITH BRIGHT GREY BACKGROUND AND SHORT VERT. SWEEP BUT WORKS FINE AFTER 3-5 MINUTES CHECK/REPLACE C931 OR C932 FOR OPEN
GOLDSTAR MCH4235 CT5 NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR MCH4335 CT5 NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCH4336 N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCH4337 N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCL4335 N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCL4336 N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCL4337 N/A NO VERTICAL SWEEP CHECK IC601,R617,R726
GOLDSTAR MCM4095 N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR MCM4175 N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
GOLDSTAR MCM4235 N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
IBM 8512 N/A NO REGULATION AND B+ VERY HIGH - MAY BLOW OTHER VARIOUS ELECTROLYTICS CHECK/REPLACE C18 ON POWER SUPPLY MODULE
JVC TM122 N/A NO PICTURE OR BRIGHT PICTURE WITH NO VIDEO CHECK/REPLACE Q11 ON CRT BOARD WITH NEW TYPE (P/N# 2SB1110)
JVC TM63U N/A NO VIDEO OUTPUT CHECK/REPLACE D506
JVC TM900SU N/A NO PICTURE WHEN POWERED UP CHECK/REPLACE D506 (P/N# DFA1A4-4) AND R558 (P/N# QRD129J-4R7S)
JVC TM9010 N/A NO PICTURE OR BRIGHT PICTURE WITH NO VIDEO CHECK/REPLACE Q11 ON CRT BOARD WITH NEW TYPE (P/N# 2SB1110)
JVC TM9060 N/A NO PICTURE OR BRIGHT PICTURE WITH NO VIDEO CHECK/REPLACE Q11 ON CRT BOARD WITH NEW TYPE (P/N# 2SB1110)
JVC TM920 N/A NO PICTURE OR BRIGHT PICTURE WITH NO VIDEO CHECK/REPLACE Q11 ON CRT BOARD WITH NEW TYPE (P/N# 2SB1110)
KLH MN1701 N/A WASHED OUT VIDEO - SYMPTOMS LOOK LIKE A OPEN DELAY LINE CHECK/REPLACE R210 FOR OPEN (220k)
KLH MN2751 N/A DEAD BUT HAS A HIGH PITCHED SQUEAL CHECK/REPLACE C521 FOR SHORT
MAGINNOVISION MAG720V2 N/A DEAD - SMOKED CHECK/REPLACE Q305 (P/N# 2SB857) AND IC201 (P/N# TDA8172), R219 (1?1/2w) AND C211 (220uF @ 35V)
MAGINNOVISION YE071103 N/A DEAD - SMOKED CHECK/REPLACE Q305 (P/N# 2SB857) AND IC201 (P/N# TDA8172)
MITAC STA439C N/A NO PICTURE CHECK/REPLACE C825 (0.01uF @ 3Kv)
PACKARD BELL PB1422EG N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
PACKARD BELL PB1422EG CT5 COMES ON WITH BRIGHT GREY BACKGROUND AND SHORT VERT. SWEEP BUT WORKS FINE AFTER 3-5 MINUTES CHECK/REPLACE C931 OR C932 FOR OPEN
PACKARD BELL PB1431EG N/A BRIGHT SCREEN (RED,BLUE OR GREEN) WITH RETRACE LINES CHECK/REPLACE Q617,Q717 OR Q817 FOR SHORT/LEAKY
PACKARD BELL PB1431EG N/A DARK BAR ON THE LEFT SIDE OF THE PICTURE CHECK/REPLACE C616,C716 AND C816
PACKARD BELL PB1431EG N/A NARROW WIDTH AND NO PINCUSHION CORRECTION CHECK/REPLACE Q511
PACKARD BELL PB1431EG N/A DELAY IN POWER COMING ON CHECK/REPLACE C921,C923 AND C924
PACKARD BELL PB1431EG N/A DC SWITCHED MODE POWER SUPPLY VOLTAGES ARE HIGH CHECK/REPLACE C923,C924 AND C921
PACKARD BELL PB1431EG N/A NO RASTER AND HV SQUEAL CHECK/REPLACE Q362,C363 AND Q511
PACKARD BELL PB1439EG N/A NO VIDEO OR FILAMENT--FRONT LED IS DIM CHECK FOR OPEN C952
PHILIPS 1215DC N/A CRACKLING SOUND OR POP IN AUDIO AT POWER UP CHECK/REPLACE C2257 WITH A 47uF SMD (P/N# 483512447102)
PHILIPS 20CM64 N/A WILL NOT AUTO-SWITCH TO THE DIFFERENT GRAPHICS MODES - EXAMPLE: WILL WORK IN VGA BUT NOT SVGA CHECK/REPLACE C2433 (P/N# 482212143931) AND RE-ADJUST H-HOLD2 ACCORDING TO SERVICE MANUAL
PHILIPS 20CM64 N/A LINE IN THE CENTER OF PICTURE CHECK/REPLACE C2506 (P/N# 482212142007)
PHILIPS 20CM640741 N/A DEAD SET --- ADD 33@3w (482211683987) PARALLEL WITH R3655 C2607(482212442161), L5604(483515763128), Q7605(482213063627),Q7615(483513047377),C2609(482212143677) C2608/C2610(482212422676),D6608(482213083128)
PHILIPS 20CM64BE N/A DEAD SET --- ADD 33@3w (482211683987) PARALLEL WITH R3655 C2607(482212442161), L5604(483515763128), Q7605(482213063627),Q7615(483513047377),C2609(482212143677) C2608/C2610(482212422676),D6608(482213083128)
PHILIPS 6CM320 N/A LOSS OF ONE OR MORE PRIMARY COLORS CHECK/REPLACE IC7301 - CHANGE R3320 TO 4.7k
PHILIPS 7CM320 N/A LOSS OF ONE OR MORE PRIMARY COLORS CHECK/REPLACE IC7301 - CHANGE R3320 TO 4.7k
PHILIPS 8CM505 N/A SHUTSDOWN INTERMITTENTLY CHECK/REPLACE C124
PHILIPS 8CM515 N/A IF THE FLYBACK IS FOUND TO BE DEFECTIVE CHECK R330,R475,R476,C476
PHILIPS CM0200 N/A HIGH VOLTAGE IS LOW CHECK/REPLACE C2902 (P/N# 482212170456)
PHILIPS CM2099TV N/A 3 INCH BAR DOWN THE MIDDLE OF THE SCREEN AND PICTURE IS WRAPPED - MAY BE HEAT RELATED GROUND DRAIN OF Q7852 AND ADJUST MODE DETECTOR AND HORZ. SYNC ACCORDING TO ADJUSTMENT #3 IN MANUAL - REMOVE GROUND
PHILIPS CM8702 N/A IF THE FLYBACK IS FOUND TO BE DEFECTIVE CHECK R330,R475,R476,C476
PHILIPS CM8762 N/A IF THE FLYBACK IS FOUND TO BE DEFECTIVE CHECK R330,R475,R476,C476
PHILIPS CM8764 N/A IF THE FLYBACK IS FOUND TO BE DEFECTIVE CHECK R330,R475,R476,C476
QUIMAX DM14 N/A DEAD WITH BLOWN B+ FUSE CHECK D303 (SCAN RECTIFIER)
SAMSUNG CCB7571 N/A VIDEO CROSS TALK WHEN A BLACK COLOR IS SURROUNDED BY A WHITE COLORED BORDER. - ESPECIALLY WHILE USING 'WINDOWS' CHANGE C516 TO NEW TYPE (P/N 1509-121-1309)
SAMSUNG CD1451D N/A POWER SUPPLY WON'T ALWAYS START UP R504 FOR OPEN OR INCREASE
SAMSUNG CD1452GA N/A POWER SUPPLY WON'T ALWAYS START UP R504 FOR OPEN OR INCREASE
SAMSUNG CD1557SD N/A WASHED OUT VIDEO - SYMPTOMS LOOK LIKE A OPEN DELAY LINE CHECK/REPLACE IC602 (PIN 16 SHOULD A HORZ. PULSE OUT) C
SAMSUNG CJ4681 N/A HORZ. BOWING CHECK/REPLACE R315
SAMSUNG CJ4681 N/A HORZ. BOWING OF PICTURE CHECK/REPLACE R315
SAMSUNG CM4531 N/A NARROW WIDTH AND NO PINCUSHION CORRECTION CHECK/REPLACE Q511
SAMSUNG CM4531 N/A DEAD CHECK/REPLACE Q511,Q362 AND L363
SAMSUNG CM4531 N/A NO RASTER AND HV SQUEAL CHECK/REPLACE Q362,C363 AND Q511
SAMSUNG CM4531 N/A DELAY IN POWER COMING ON CHECK/REPLACE C921,C923 AND C924
SAMSUNG CM4531 N/A NO RASTER AND HAS A HV SQUEAL CHECK/REPLACE Q362,C363 AND Q511
SAMSUNG CM4531 N/A DARK BAR ON THE LEFT SIDE OF THE PICTURE CHECK/REPLACE C616,C716 AND C816
SAMSUNG CM4531 N/A DC SWITCHED MODE POWER SUPPLY VOLTAGES ARE HIGH CHECK/REPLACE C923,C924 AND C921
SAMSUNG CM4541 N/A Q511 AND Q362 SHORTED CHECK/REPLACE Q511,Q362 AND L363
SAMSUNG CQ4551 N/A INTERMITTENT BUZZING SOUND FROM POWER SUPPLY AND PIX BLOOMS CHECK/REPLACE STR53041 IN POWER SUPPLY FOR INTERMITTENT
SAMSUNG CSD5577 N/A WASHED OUT VIDEO - SYMPTOMS LOOK LIKE A OPEN DELAY LINE CHECK/REPLACE IC602 (PIN 16 SHOULD A HORZ. PULSE OUT) C
SAMSUNG CSF7487 N/A VIDEO CROSS TALK WHEN A BLACK COLOR IS SURROUNDED BY A WHITE COLORED BORDER. - ESPECIALLY WHILE USING 'WINDOWS' CHANGE C516 TO NEW TYPE (P/N 1509-121-1309)
SAMSUNG CVB4581 N/A VERTICAL INSTABILITY OR VERTICAL FOLDOVER AND SHORT SWEEP RE-ADJUST VR201 FOR PROPER OPERATION (FACTORY MIS-ADJUSTED) SHOULD BE ADJUSTED IN THE 1024x768 MODE
SAMSUNG CVB4587 N/A VERTICAL INSTABILITY OR VERTICAL FOLDOVER AND SHORT SWEEP RE-ADJUST VR201 FOR PROPER OPERATION (FACTORY MIS-ADJUSTED) SHOULD BE ADJUSTED IN THE 1024x768 MODE
SAMSUNG CVB4991 N/A VERTICAL INSTABILITY OR VERTICAL FOLDOVER AND SHORT SWEEP RE-ADJUST VR201 FOR PROPER OPERATION (FACTORY MIS-ADJUSTED) SHOULD BE ADJUSTED IN THE 1024x768 MODE
SAMSUNG CVB4993 N/A VERTICAL INSTABILITY OR VERTICAL FOLDOVER AND SHORT SWEEP RE-ADJUST VR201 FOR PROPER OPERATION (FACTORY MIS-ADJUSTED) SHOULD BE ADJUSTED IN THE 1024x768 MODE
SAMSUNG CVB4997 N/A VERTICAL INSTABILITY OR VERTICAL FOLDOVER AND SHORT SWEEP RE-ADJUST VR201 FOR PROPER OPERATION (FACTORY MIS-ADJUSTED) SHOULD BE ADJUSTED IN THE 1024x768 MODE
SAMSUNG CVM4967T N/A NO PINCUSHION CONTROL AFTER A FEW MINUTES OF OPERATION PICTURE PULLS IN ON THE SIDES CHECK/REPLACE C207 (0.47uF @ 50v) (P/N# 917 120470HM) AND IC202 (LM358) (P/N# 881 100358AANA)
SAMSUNG CVM4967T N/A DEAD - NO ATTEMPT TO TURN ON CHECK/RESOLDER CONNECTIONS ON POWER SWITCH WHERE IT SOLDERS TO THE MAIN PCB
SAMSUNG SC431E N/A DEAD--BLOWS REGULATOR TRANSISTOR CHECK FUSE,REGULATOR XSTR.,R905,R906
SAMSUNG SM12SFA7 N/A INTERMITTENT VERT. SWEEP--COLLAPSES QUICKLY CHECK FOR LEAKY C304
SAMSUNG SM440 N/A NARROW HORZ. SWEEP AND STRETCHED VERT. SWEEP CHECK/REPLACE 24V REGULATOR IC
SAMSUNG SM460 N/A DARK PICTURE OR NO PICTURE CHECK/REPLACE C512 AND C514 FOR OPEN
SCOTT SM2350A N/A DEAD - WILL NOT POWER UP CHECK/REPLACE IC501 AND R507
SCOTT SM2600 N/A SQUEAL FROM HORZ. CIRCUIT-HORZ. CENTERING OFF TO THE LEFT- HORZ. FOLDOVER ON THE LEFT CHECK/REPLACE Q104 AND C104 FOR OPEN
SCOTT SM2600 N/A DEAD WITH A HIGH PITCHED SQUEAL CHECK/REPLACE Q104 AND T101
SOCOS CM1402 N/A NO HORZ. SWEEP -- ONLY HAS A VERTICAL LINE CHECK/REPLACE C418 (0.56uF @ 250v)
SONY CDP15SF2 N/A OSD IS MISSING OR DISPLAYED INCORRECT CHECK/REPLACE IC901 (P/N# 8-759-354-66)
SONY CDP15SF2 N/A NO PICTURE WITH WIDE VERTICAL SYNC. PULSE CHECK/REPLACE IC901 (P/N# 8-759-354-66) AND C948 (P/N# 1-136-169-00) (0.22uF @ 50v)
SONY CDP17SF2 N/A NOISE IN THE LEFT BOTTOM PICTURE CHECK/REPLACE R008 (P/N# 1-249-413-11)
SONY CDP17SF2 N/A NO PICTURE WITH WIDE VERTICAL SYNC. PULSE CHECK/REPLACE IC901 (P/N# 8-759-370-67) AND C948 (P/N# 1-136-169-00) (0.22uF @ 50v)
SONY CDP17SF2 N/A OSD IS MISSING OR DISPLAYED INCORRECT CHECK/REPLACE IC901 (P/N# 8-759-370-67)
SONY CPD15SF1 N/A VIDEO SMEAR OR GHOST WHEN AN ALL WHITE OR ALL BLACK IMAGE IS PLACED ON A GREY BACKGROUND CHANGE R131,R231,R331 TO 120k ,CHANGE R132,R232,R332 TO 2K ADD R134,R234,R334 4.7k AND C208 5pF @ 50v (1-102-942-00)
SONY CPD15SX1 N/A DEAD OR REPEATED FAILURE OF Q301 CHECK/REPLACE Q301 AND C323 (P/N# 1-124-903-11 1uF @ 50v)
SONY CPD17SF2 N/A DEAD OR REPEATED FAILURE OF Q507 CHECK/REPLACE Q507 AND C525 (P/N# 1-126-933-11 100uF @ 16v)
SONY CPD20SF2 N/A NO POWER WHEN UNIT WARMS UP CHANGE Q608 WITH NEW TYPE (P/N# 8-729-803-76 2SA1371E), AND R655 (P/N# 1-216-344-11 0.39?5% 1w)
SONY CPD20SF2 N/A NO PICTURE - MISSING A COLOR - INCORRECT BRIGHTNESS CHECK/REPLACE IC005 (P/N# 8-749-011-84), ADD 10uF @ 100v CAPACITOR W/NEG. TO D304 ANODE AND POS. TO D303 CATHODE
SONY CPD20SF2 N/A NO POWER - ORANGE LED BLINKS CHECK/RESOLDER CONNECTIONS ON C628 (ONE OF THE C628 LEADS MAY BE SHORTING OUT)
SONY CPD20SF2T N/A NO PICTURE - MISSING A COLOR - INCORRECT BRIGHTNESS CHECK/REPLACE IC005 (P/N# 8-749-011-84), ADD 10uF @ 100v CAPACITOR W/NEG. TO D304 ANODE AND POS. TO D303 CATHODE
SONY GDM17SE1 N/A PICTURE DIMS AND EVENTUALLY DISAPPEARS CHECK/REPLACE C625 (P/N# 1-123-973-91)
SONY GDM17SE1 N/A NO OPERATION AND FRONT PANEL LED'S ARE FLASHING REMOVE C511, REMOVE D504 AND INSTALL IT IN C511 PLACE - ALSO CHECK Q511,Q512,PS500 AND C548
SONY GDM17SE2T N/A NO POWER - ORANGE LED BLINKS CHECK/RESOLDER CONNECTIONS ON C628 (ONE OF THE C628 LEADS MAY BE SHORTING OUT)
SONY GDM17SE2T N/A NO PICTURE - MISSING A COLOR - INCORRECT BRIGHTNESS CHECK/REPLACE IC005 (P/N# 8-749-011-84), ADD 10uF @ 100v CAPACITOR W/NEG. TO D304 ANODE AND POS. TO D303 CATHODE
SONY GDM20SE1 N/A NO OPERATION AND FRONT PANEL LED'S ARE FLASHING REMOVE C511, REMOVE D504 AND INSTALL IT IN C511 PLACE - ALSO CHECK Q511,Q512,PS500 AND C548
SONY GDM20SE1 N/A PICTURE DIMS AND EVENTUALLY DISAPPEARS CHECK/REPLACE C625 (P/N# 1-123-973-91)
STANDARD TECH STA439C N/A NO PICTURE CHECK/REPLACE C825 (0.01uF @ 3Kv)
TANDY CM11 N/A DEAD SET CHECK/REPLACE Q702,R704 AND R711
TVM MD141V+ U07 N/A DEAD BUT GREEN POWER LED ON FRONT DOES BLINK ON AND OFF CHECK/REPLACE D805, D816 AND D818
ZENITH ZVM1380F N/A BRIGHTNESS LIMITER CIRCUIT NOT WORKING CHECK/REPLACE R454,Q205,Q413
ZENITH ZVM1380F N/A RETRACE LINES IN THE PICTURE CHECK/REPLACE Q504,Q544,Q574,D308,R329,Q505,Q545,Q575
ZENITH ZVM1380F N/A PICTURE OR COLOR MISSING CHECK/REPLACE IC201,IC212,Q501,Q502,Q541,Q542,Q543,Q571, Q572,Q503,Q543,Q573,Q504,Q505,Q506,Q544,Q545,Q574,Q575,Q576
ZENITH ZVM1380F N/A NO HORZ. SWEEP CHECK/REPLACE Q403,Q404,L401,C415,Q405
ZENITH ZVM1380F N/A NO VERTICAL SWEEP CHECK/REPLACE R320,Q302,Q303,IC401,Q301
ZENITH ZVM1380F N/A RASTER IS TOO WIDE CHECK/REPLACE R433,Q205,C417,C414,L401,D407
ZENITH ZVM1380F N/A NO PICTURE CHECK/REPLACE Q408,Q407 AND R444
ZYNK SM1418 N/A POWER SUPPLY CHIRPS - NO PICTURE CHECK/REPLACE Q203 (ECG379)
ZYNK SM1418 N/A COMPRESSED VERTICAL SWEEP AT THE TOP CHECK/REPLACE C405 AND C406 (100uF @ 16v)
ZYNK SM1418 N/A POWER SUPPLY SQUEALS - MONITOR WORKS FINE OTHERWISE OTHER THAN SOME HORZ. TEARING CHECK/REPLACE C910
1
LAMSON Digital Electronics
Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines
TEL:00632-2559675  TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810
E-mail:lamsonsm@gmail.com   

YAHOO MESSENGER ID : myrna_q_ng or saishu_ng
SKYPE ID: myrna_q_ng or saishu_ng


(old) Lamson Importers & Exporters Trading

<We will not be using the old address and phone no. in the future. Please be noted when calling us, sending letters, parcels or buying our products>
OLD Address: 681 Carmen Building, Ronquillo St. Quiapo, Manila, Philippines
Phone:00632-7332936 7332940
Fax:00632-7332940 E-mail: